Once screen is cleared (goes black), begin pressing the F2 key, over and over, until you see the BIOS Setup screen displayed.Press the F10 key (followed by Y) to save the BIOS Configuration and exit BIOS Setup.Press the F9 key (followed by Y) to reset of the BIOS configuration.Verify, using the BIOS version string, that the BIOS installed properly.once per second) until you see the BIOS Setup (or Visual BIOS) screen displayed. Immediately begin pressing the F2 key, over and over (approx.Remove the USB flash drive from the back panel of the board.Power off and then unplug the power cable from the NUC.When it completes, it will put a message up on the screen indicating that power need to be withdrawn. The NUC will reboot itself and then begin the BIOS Recovery process.When it does, press F4 to initiate the BIOS Recovery process. Wait for the Power Button Menu to appear.Power the NUC on, holding in the power button until the button's LED turns yellow.Insert the USB flash disk into one of the USB connectors of the NUC.Properly eject the USB flash disk from the PC (do not just yank it out).Download file KY0067.BIO and copy it into the root folder of the USB flash disk.On a Windows-based PC, reformat a USB 2.0 flash disk using the FAT32 file system and with the Quick Format option disabled.I therefore recommend that you install this latest version using the BIOS Recovery method. Now, going from BIOS 34 to BIOS 67 is an awfully big jump.

American megatrends bios update 0503